Oilskin Coat

The Burke & Wills Stockman Long Coat has been designed for the warmer weather and those days that still need the added protection to withstand the diverse climate. This coat is made from lighter weight 9oz Cotton Dri-Tec Oilskin fabric and can be worn over your clothing and still allows you to feel comfortable at the same time. It features an attached oversized shoulder cape for extra protection, snap closure neck tab, generous sized front pockets and a large gusset insert at the back for added movement when riding.

Features

  • Main Fabric: 100% Cotton Dri-Tec Oilskin 9oz
  • Lining Fabric: 100% Cotton Drill
  • Water & wind resistant
  • 17mm high quality logo snaps
  • Attached cape with underarm straps
  • Front storm flap with logo snap closure
  • Logo snap closure neck tab
  • Patch pockets with top entry. Pockets are felt lined for comfort & warmth
  • Adjustable tab logo snap cuffs for secure fit
  • Large gussets insert at back for movement with logo snaps to conceal
  • Inside leg straps for when riding and to prevent flapping around in high winds
  • Mock suede logo patch on pocket flap
  • Cotton drill half body lining
  • Cotton drill sleeve lining
  • Inside back neck hanging loop
  • Internal patch pocket

 Colour Disclaimer
Despite every effort to provide accurate images of each product's colour, actual colours and design may vary slightly, due to different device screen settings, the lighting in the installation location, slight differences in product finishes over time and other factors.

What can I expect from a brand-new oilskin product?

Your oilskin garment may have a light oil surface residue from the manufacturing process. This is normal, and it will evaporate over time with normal wear. You can speed up the process by hanging your garment in a warm sunny location until the surface oil has evaporated.

How do I care for my Oilskin garment? 
Traditional Oilskin coats and jackets are made from sturdy 100% cotton that is coated with a uniquely formulated oil and wax finish to give the Oilskin its distinctive weatherproof and breathable character. As a specialised garment, Oilskin fabric needs special attention to maintain its weatherproofing qualities.

The following care instructions will help prolong the life of your Oilskin garment. Before you buy one of our coats or jackets, please make sure you choose the right size as stretched seams may allow water to penetrate.

Cleaning

  • Follow the washing/care instructions attached to the inside of the garment
  • Do not wash with detergent or hot water as this removes the oil and wax which are crucial to the Oilskin’s waterproofing qualities
  • When the garment gets dirty, brush off dirt or sponge down with cold water
  • When garment is extremely dirty, hand wash in cold water
  • If the garment requires a complete clean, we recommend using a Wool/Oilskin Detergent or pure soap (please note, the garment will require reproofing if it is washed using soap or detergent as these will wash out the waterproofing qualities):
  • After washing, rinse well (we suggest hanging the garment outside on clothesline and hosing down)
  • Hang in a well-ventilated area until completely dry
  • Do not hang on radiators, expose to naked flame, or use artificial heat to dry
  • Once completely dry, the garment will require reproofing with our Reproofer Wax
  • Do not machine wash, dry clean, starch or iron

Removing Mould

  • Firstly, brush off as much mould on the garment as you can find.
  • Sponge diluted vinegar onto the affected areas.
  • Hand wash in Lukewarm water using a Oilskin/Wool Detergent or a pure soap. Do not soak your coat.
  • Rinse off as much of the soap as you can and hang it out to dry using a strong coat hanger. Keep out of direct sunlight.
  • Hose down any excess soap and air your coat. It may take some time airing your coat out to completely remove the musky smell.
  • Once you’ve cleaned your coat the soap may have stripped most of the oil out of the coat so it will need reproofing. When reproofing your oilskin garment please refer to the reproofing instructions as listed above on this page
  • If the garment is completely overrun with mould, you can wash the whole coat in diluted vinegar and water. This will get the vinegar right through the whole coat to kill the mould.
  • Please note, always store your oilskin garment in a dry well-ventilated area. Do not place in a cupboard or plastic bag for long periods of time, otherwise it will become mouldy.

Reproofing

  • With wear over time, the oil and wax on the Oilskin fabric will naturally dry out. We recommend regular monthly checks to prevent dryness and promote longevity.
  • After reproofing, hang the garment out in the sun on a warm day or use the heat of a hair dryer on a low setting, spreading the heat evenly over the coat (this is recommended to achieve a factory finish)
  • After drying, place garment on a strong hanger and leave to cool

Storage And General Care

  • Always store your Oilskin garment in a dry, well-ventilated area
  • Do not place in a cupboard or plastic bag for long periods of time as it will become mouldy
  • If your Oilskin garment has become mouldy, we recommend hanging it under full sun for a couple of weeks
  • If garment is still mouldy, hand wash with pure soap and reproof
  • The oil and wax proofing on your garment keep you dry but can also rub off on other fabrics, furnishings, and garments, so be careful when wearing or storing your coat and do not place next to porous surfaces
  • Do not stitch through or repair the outside of the fabric unless absolutely necessary
  • If repairs need to be made, please make sure the area is reproofed after repairing to prevent leaking

 

(MSTOCKLCB)

SKU MSTOCKLCB
Model # MSTOCKLCB
Brand Burke and WIlls

Be The First To Review This Product!

Help other Bundy Outdoors users shop smarter by writing reviews for products you have purchased.

Write a product review





 

We Also Recommend


Others Also Bought

More From This Category