Oilskin Jacket

Stay warm and fashionable with the Burke and Wills Corella Jacket. A quality oilskin coat that is both water and wind resistant with a removable hood and 100% cotton check lining through the body of the jacket. The beautiful long lines of this jacket are further added to by the drawstring waist. 

The rear vents allow for ventilation with snap clip closures and a storm flap at the front of the jacket.


  • Main Fabric: 100% Cotton Dri-Tec Waxed 6oz
  • Lining Fabric: 100% Cotton Check
  • Water & wind resistant
  • 17mm high quality logo snaps
  • Cotton check lined detachable hood with drawcord
  • Hood stand can be concealed once hood is removed
  • Drawcord on inside waist
  • Front storm flap with logo snap closure and YKK zipper
  • 2 x vents in back with logo snap closure
  • Adjustable logo snap cuffs for secure fit
  • Patch pockets with side & top entry. Pockets are felt lined for comfort & warmth
  • Mock suede logo patch on pocket flap
  • Cotton check body lining
  • Polyester sleeve lining
  • Inside back neck hanging loop
  • Internal patch pocket
  • Internal zip welt pocket

Size Chart

Colour Disclaimer
Despite every effort to provide accurate images of each product's colour, actual colours and design may vary slightly, due to different device screen settings, the lighting in the installation location, slight differences in product finishes over time and other factors.

What can I expect from a brand new oilskin product?

Your oilskin garment may have a light oil surface residue from the manufacturing process. This is normal, and it will evaporate over time with normal wear. You can speed up the process by hanging your garment in a warm sunny location until the surface oil has evaporated.

How do I care for my Oilskin garment? 
Traditional Oilskin coats and jackets are made from sturdy 100% cotton that is coated with a uniquely formulated oil and wax finish to give the Oilskin its distinctive weatherproof and breathable character. As a specialised garment, Oilskin fabric needs special attention to maintain its weatherproofing qualities.

The following care instructions will help prolong the life of your Oilskin garment. Before you buy one of our coats or jackets, please make sure you choose the right size as stretched seams may allow water to penetrate.


Follow the washing/care instructions attached to the inside of the garment

Do not wash with detergent or hot water as this removes the oil and wax which are crucial to the Oilskin’s waterproofing qualities

When the garment gets dirty, brush off dirt or sponge down with cold water

When garment is extremely dirty, hand wash in cold water

If the garment requires a complete clean, we recommend using a Wool/Oilskin Detergent or pure soap (please note, the garment will require reproofing if it is washed using soap or detergent as these will wash out the waterproofing qualities):

After washing, rinse well (we suggest hanging the garment outside on clothesline and hosing down)

Hang in a well-ventilated area until completely dry

Do not hang on radiators, expose to naked flame or use artificial heat to dry

Once completely dry, the garment will require reproofing with our Reproofer Wax

Do not machine wash, dry clean, starch or iron

Removing Mould

Firstly brush off as much mould on the garment as you can find.

Sponge diluted vinegar onto the affected areas.

Hand wash in luke warm water using a Oilskin/Wool Detergent or a pure soap. Do not soak your coat.

Rinse off as much of the soap as you can and hang it out to dry using a strong coat hanger. Keep out of direct sunlight.

Hose down any excess soap and air your coat. It may take some time airing your coat out to completely remove the musky smell.

Once you’ve cleaned your coat the soap may have stripped most of the oil out of the coat so it will need reproofing. When reproofing your oilskin garment please refer to the reproofing instructions as listed above on this page

If the garment is completely overrun with mould you can wash the whole coat in diluted vinegar and water. This will get the vinegar right through the whole coat to kill the mould.

Please note, always store your oilskin garment in a dry well-ventilated area. Do not place in a cupboard or plastic bag for long periods of time, otherwise it will become mouldy.


With wear over time, the oil and wax on the Oilskin fabric will naturally dry out. We recommend regular monthly checks to prevent dryness and promote longevity.

After reproofing, hang the garment out in the sun on a warm day or use the heat of a hair dryer on a low setting, spreading the heat evenly over the coat (this is recommended to achieve a factory finish)

After drying, place garment on a strong hanger and leave to cool

Storage And General Care

Always store your Oilskin garment in a dry, well-ventilated area

Do not place in a cupboard or plastic bag for long periods of time as it will become mouldy

If your Oilskin garment has become mouldy, we recommend hanging it under full sun for a couple of weeks

If garment is still mouldy, hand wash with pure soap and reproof

The oil and wax proofing on your garment keeps you dry but can also rub off on other fabrics, furnishings and garments, so be careful when wearing or storing your coat and do not place next to porous surfaces

Do not stitch through or repair the outside of the fabric unless absolutely necessary

If repairs need to be made, please make sure the area is reproofed after repairing to prevent leaking


Brand Burke and Wills

Be The First To Review This Product!

Help other Bundy Outdoors users shop smarter by writing reviews for products you have purchased.

Write a product review


Others Also Bought

More From This Category